2009年12月9日 星期三

Impulse Drive



By Captain 林 澤
Stardate: 11191224



Introduction

This should be a familiar image to everyone who remembers the TV show “Star Trek”. In the show, starships and shuttlecrafts are always equipped with three types of thrust systems, which are: Warp drive, chemical thrust, and impulse drive which is my topic for investigation.

Of course, the warp drives are the starships’ and shuttlecrafts’ major way of interplanetary travel, however, they have to drop from warp speed and turn it into impulse power as they approach their destination (impulse power is also used in emergency situation, such as when warp drives are off line ).


Okay, let’s return to the 21st century

According to the Law of Momentum (momentum=mass X velocity), the thrust system has to push the exhaust gas out as fast as possible, because the speed of exhaust gas emission is in direct proportion to thrust. But, the exhaust speed of our current best rocket engine is only 3000m/s, which means they have to fly with lots of fuel.

Impulse drives expel plasma to create propulsion. With its higher (100000m/s) exhaust velocities, impulse drive offers distinct advantages over conventional types of propulsion for each of the current deep space mission applications.

Note: Impulse drives are based on magnetoplasmadynamic (MPD) thrusters.



MPD Operation

“In its basic form, the MPD thruster has two metal electrodes: a central rod-shaped cathode, and a cylindrical anode that surrounds the cathode. Just as in an arc welder, a high-current electric arc is struck between the anode and cathode. As the cathode heats up, it emits electrons, which collide with and ionize a propellant gas to create plasma. A magnetic field is created by the electric current returning to the power supply through the cathode, just like the magnetic field that is created when electrical current travels through a wire. This self-induced magnetic field interacts with the electric current flowing from the anode to the cathode (through the plasma) to produce an electromagnetic (Lorentz) force that pushes the plasma out of the engine, creating thrust. An external magnet coil may also be used to provide additional magnetic fields to help stabilize and accelerate the plasma discharge.”

Reference: NASA


Give REASONS for your design choice

The reason for my choice of this topic as my project is that: “I spent my youth, looking up at the stars and dreaming of what might be.” I found the answer as I grew. The answer is that, there is a new frontier for all of us, and if you want to explore it, then you need a starship at least.

The conventional types of propulsion systems are less efficient, and produce too much vibration during takeoff, which may damage a space shuttle and cause it to crash when it returns to the Earth’s atmosphere. So, the only way to make interplanetary travel successful before we invent warp drive is this- Impulse drive.


Calculation

“The magnitude of the force exerted on the gas is then given as

where F is the force in Newtons, J is the total current, and B is the magnetic flux density. The magnetic flux density B is also a function of the total current flowing, so the force exerted on the propellant is actually related by the total current squared. This provides a strong incentive to operate the thruster with the largest tolerable currents. A more correct approximation can be obtained by integrating the force density over the volume of the thruster nozzle. This yields the total force as [1]

where F is the force in Newtons, J is the total current, u is the magnetic permeability of free space, ra is the radius of the anode, and rc is the radius of the cathode.

Reference: http://myelectricengine.com/projects/mpdthruster/mpdthruster.html


Captain’s log



What WENT WELL with your DEVELOPMENT PROCESS?

According to my analysis, the impulse drive produced plasma successfully and there is obvious difference between working with nitrogen and working without nitrogen.

There were a few arcs between the central rod-shaped cathode and the cylindrical anode in the fuel injector section before I engaged the gas supply. When I engaged the gas supply, something happened there in the interior of the engine- it began with a few arcs that went forward and backward. Suddenly the arcs radiating to the entire engine in its interior- the pressure was high enough!

After the starting sequence, we noticed that the nitrogen smoke didn’t pass by the nozzle; instead, the smoke avoided it! This made us assume two hypotheses; first is that the engine really produced thrust, which caused the smokes to go by a devious route to avoid the plasma flow discharged from the engine. Second is that the engine didn’t produce any thrust or accelerate the plasma, the nitrogen smoke only avoided the nitrogen flow discharged from the engine.



What DID NOT go well with your DEVELOPMENT PROCESS?

1. The process that did not go well was that, I don’t have a second chance to do this experiment again, to make sure the engine really produces measurable thrust although I’m sure it does!

2. Another imperfection was that, the gas flow was unstable. I really think that the gas needed to be stored in a high pressure steel cylinder, not stored in the liquid phase bottle. High pressure steel cylinder is able to keep the gas flow stable.

3. Both voltage and current of the power supply are not high enough. I believe if we can get higher voltage and current, then we might be able to detect thrust change with our own eyes.


How would you IMPROVE your DESIGN?

1. The engine must be fully computerised and machine built, because if we don’t do this, then the thrust and other required readings would be unpredictable.

2. The gas flow must be stable; otherwise we would unable to get correct readings.

3. Since we were unable to get high enough voltage and current, we should change our power supply into a capacitor array, which would allow us to get whatever high voltage and current we want!(although it would also be able to vaporize a man in seconds)


WHAT I LEARNED while working on this project

Aside from the theories I learned, this project made me understand that nothing is impossible if we persist. For example, a long time ago people said that humans cannot fly into the sky, but nowadays we can. A long time ago people also said that we cannot travel at supersonic speed, but nowadays we can. A long time ago people also said that the sky’s a barrier, but nowadays, we’re saying that the sky’s the limit!

By the way, we have achieved the impossible- we made the School into the first high school on Earth to successfully create the magneto plasma dynamic thrust!


WHAT I DID as my particular job in the project team

I’m the leader of the project team; I’m also the chief designer in the team. I designed the entire engine and its liquid nitrogen containment. My role is just like Captain Picard in this design project. I always do what no one has done before!


Reference

http://myelectricengine.com/projects/mpdthruster/mpdthruster.html
http://en.wikipedia.org/wiki/Impulse_drive
http://www.nasa.gov/home/index.html
http://www.startrek.com


Words

Space, the final frontier; these are the voyage of the starship Enterprise, its continuing mission: to explore strange new worlds, to seek out new life and new civilizations, to boldly go where no one has gone before!


Reference: Theme of the Star Trek The Next Generation

2009年11月15日 星期日

慢跑高談


傍晚,咱兄弟相約慢跑。在往返途中,偶爾留下有趣對話。

弟弟問:「你的食量是我的兩倍,那為什麼你跑起來也沒比我快上兩倍?」

哥哥答:「那是因為物理定律的關係,要到達光速所使用的能量,會趨近於無限大。」